Takeuchi US
Home » Products » Archive » Track Loaders » TL240



The sturdy all welded frame and heavy duty oversized undercarriage of the Takeuchi TL240 compact track loader provides hours of reliable service.  An unrivaled blend of flotation, traction and breakout forces allow the TL240 to power through the most difficult material with ease.  The operator's station offers low effort pilot controls and proportional auxiliary switches to give the operator the precision needed to work more efficiently in a comfortable fatigue free environment.  Power and maneuverability make the TL240 an excellent choice for any size job that requires unsurpassed performance. 

Click the links below to view product specifications.

Operating Weight (w 165 lb operator)
Standard machine with bucket
 Canopy 10,115 lb (4,588 kg)
Cab 10,365 lb (4,701kg)
Tipping Load
5,952 lb (2,699 kg)
ROC (SAE J818 standard 35% tipping load*)
2,083 lb (944 kg)
Operating Load at 50% of Tipping Load
2,976 lb (1,350 kg)
ROC with Optional Counterweight
2,300 lb (1,043 kg)
Bucket Breakout Force
7,403 lb (3,357 kg)
Lift Arm Breakout Force
7,425 lb (3,368 kg)
Traction Force
11,070 lb (5,016 kg)
Capacity SAE Heaped (Bucket optional)
20.3 cu ft (0.59m3)
Cycle time
    Raise-Full Load
4.4 (Seconds)   
    Lower-No Load
2.9 (Seconds)   
    Dump-Full Load
3.1 (Seconds)   
    Curl-No Load
2.1 (Seconds)   
*Operating capacity of track loaders to be rated according to SAE J818 at no more than 35% of the tipping load
Yanmar 4TNV98I-Turbo
Tier Rating
EPA Tier 3
 4/203 cu in (3.3 L)
 86 hp (63.9 kW)
Rated Engine Speed
 2,500 rpm
Maximum Torque
 219 ft-lb @ 1,850rpm (297 Nm)
Engine Lubrication
 10.8 qt (10.2 L)
Cooling System
 17.4 qt (16.5 L)
Fuel Tank Capacity
 23.8 gal (90 L)
Fuel Consumption (65% of full load)
 3.1 gal/hr (11.7 L/hr)
Electrical System
 12 volts / 40 amps
Traction Drive Type
Hydrostatic drive system with double reduction planetary final drive
Parking Brake
Spring applied, hydraulically released, multiple wet friction disk
Track Roller Type
Large, outside running, permanently sealed rollers with precision metal face seals
Track Rollers
(per side)
Track Width
17.7 in (450 mm)
Track Ground
Contact Length
4 ft 10.9 in (1,495 mm)
Ground Pressure (psi)
Canopy        Cab
4.3         4.4
Maximum Travel Speed
Low Range
4.7 mph (7.6 km/hr)
High Range
7.2 mph (11.6 km/hr)
Hydraulic Reservoir Capacity
12.9 gal (49 L)
Hydraulic System Capacity
 19.8 gal (75 L)
Auxiliary Hydraulic Flow
 20 gal/min (76 L/min)
Auxiliary Hydraulic Flow - Optional High Flow
 36.3 gal/min (138 L/min)
Auxiliary Hydraulic Pressure
 3,000 psi (20.6 MPa)
Front Clearance Radius with Bucket 
7 ft 6 in (2,295 mm)
Rear Clearance Radius
 5 ft 5.7 in (1,670 mm)
Angle of Departure
 30 degrees
Maximum Lift Height to Bucket Pin
 10 ft 3 in (3,120 mm)
Dump Height Fully Raised 
 7 ft 11.8 in (2,405 mm)
Maximum Dump Angle Fully Raised
 38.5 degrees
Maximum Bucket Rollback at Ground Level
 30.7 degrees
Reach Fully Raised
 2 ft 10.4 in (875 mm)
Overall Width Without Bucket
 5 ft 9.7 in (1,770 mm)
Recommended Bucket Width
 76 in (1,930 mm)
Overall Height
 7 ft 5 in (2,270 mm)
Overall Length with Bucket
 12 ft 6 in (3,810 mm)
Minimum Ground Clearance
 12.8 in (325 mm)


  • EPA Tier 3 compliant
  • Turbocharged
  • Automatic fuel bleed system
  • Extended life coolant
  • Dual element air filter with pre-cleaner


  • Electronic engine monitoring system with fuel and coolant temperature gauge
  • 12 Volt system with 60 amp alternator
  • Halogen work lights, front and rear
  • Engine preheat
  • Hour meter
  • Back-up alarm


  • Permanently sealed track rollers with metal face seals
  • Welded track frame with multiple cross members
  • 2-speed travel
  • 17.7" rubber track with integrated steel cables and forged steel inserts
  • Grease type track adjuster


  • Cushioned boom cylinders
  • Boom float with detent
  • Pilot proportional hydraulic controls
  • Pressure relieving flat faced coupler body
  • 14-pin connector with push button control
  • Hydraulic self leveling
  • Available high flow auxiliary hydraulics. 36.3 gpm


  • Radial boom design
  • Mechanical quick coupler
  • Available Hydraulic quick coupler
  • Available 76" HD smooth lip dirt bucket (20.3 cu ft)
  • Available 76" HD dirt bucket with (8) teeth (20.3 cu ft)
  • Available 7' Six way dozer blade
  • Available HD 48" pallet forks
  • Available Counterweight kit (575 lbs)


  • Tilt-up operator station
  • Pilot operated controls
  • Six-way adjustable suspension seat
  • Rear pivoting seat bar with integrated arm rests
  • Retractable seat belt
  • ROPS / FOPS structure
  • Available Cab with roll-up door, air conditioning, heat, defrost, and wiper
  • Available 3" seat belt
  • Available AM / FM / Mp3 radio with NOAA weatherband

©2017 Takeuchi Manufacturing [US], Ltd. All Rights Reserved.
Equipment depicted on this website may include optional equipment.