Takeuchi US
Home » Products » Archive » Wheel Loaders » TW65


The TW50, TW65, and TW80 have a compact design that allows them to easily maneuver in tight spaces with minimal damage to lawns, pavement, or other sensitive surfaces.  They provide incredible reach and dump height for outstanding material handling, and the spacious operator's station is elevated giving the operator greater visibility and jobsite awareness.  These wheel loaders deliver power and precise control for increased productivity, and lower operational and maintenance costs which make them a great alternative to skid steer loaders.  So, whether you are loading mulch and sod, removing snow, feeding hoppers, or sorting and stockpiling material, you will find Takeuchi wheel loaders are an ideal choice for a variety of applications. 

Click the links below to view product specifications.

Loader Boom Linkage Type
Operating Weight (w 165 lb operator)
Standard machine with bucket
 10,582 lb (4,800 kg)
Tipping Load, Straight
8,073 lb (3,800 kg)
Tipping Load, Full Turn
 7,143 lb (3,240 kg)
ROC with bucket * (SAE J818)
 3,572 lb (1,620 kg)
Bucket Breakout Force
11,600 lb (5,262 kg)
Lift Arm Breakout Force
 10,319 lb (4,680 kg)
Traction Force
9,217 lb (4,180 kg)
Cycle Time
   Raise - Full Load
 5.8 (Seconds)   
   Lower - No Load
 3.5 (Seconds)   
   Dump - Full Load
 1.7 (Seconds)   
*Operating Capacity is 50% of full turn tipping load with bucket according to SAE J818 
Deutz TD2011 Oil Cooled
Tier Rating
 EPA Interim Tier 4
 4/221 cu in (3.62 L)
 69 hp (51.3 kW)
Rated Engine Speed
 2,200 rpm
Maximum Torque
 177 ft-lb @ 1,600 rpm (240 Nm)
Engine Lubrication
 11.6 qt (11.0 L)
Fuel Tank Capacity
 26.4 gal (100 L)
Fuel Consumption (65% of full load)
 2.5 gal/hr (9.5 L/hr)
Electrical System
 12 volts / 80 amps
Transmission Type
Hydrostatic Drive with 100% Hydraulic Inching Pedal
Axle Type
 Rigid Axles With Outboard Planetary Reduction
Differential Lock
 100% Differential Lock in Front and Rear Axles
Parking Brake
 Spring Applied, Hydraulically Released, Multiple Wet Friction Disk
Service Brakes
 Hydrostatic and Multi Wet Friction Disk
Tire Gauge
 4 ft 11 in (1,510mm)
Steering Articulation
40 Degrees Left / 40 Degrees Right
Frame Oscillation
12 Degrees Left / 12 Degrees Right
Maximum Travel Speed
Low Range
 4.0 mph (6.5 km/hr)
High Range
12.4 mph (20 km/hr)
Hydraulic Reservoir Capacity
13.7 gal (52.0 L)
Auxiliary Hydraulic Flow
 15.8 gal/min (60 L/min)
Auxiliary Hydraulic Pressure
 3,844 psi (26.5 MPa)
6 ft 6 in (2,000 mm)
Outside Turning Radius
 12 ft 2 in (3,715 mm)
Max Lift Height to Bucket Pin
 10 ft 5 in (3,170 mm)
Bucket Clearence Height
 9 ft 1 in (2,800 mm)
Dump Height Fully Raised
 8 ft 0 in (2,465 mm)
Max Dump Angle Fully Raised
 45 Degrees
Max Bucket Rollback at Ground Level
 48 Degrees
Reach Fully Raised
 2 ft .6 in (624 mm)
Overall Width Without Bucket
 6 ft 1.5 in (1,869 mm)
Overall Height
 8 ft 8.5 in (2,652 mm)
Overall Length With Bucket
 17 ft 2 in (5,230 mm)
Minimum Ground Clearance
 17 in (450 mm)
Loader operating information and dimensions are based on the standard machnine configuration, 1.05 cu. yd. bucket, 15-19.5 tires, 165 lb (75 kg) operator.  This information is affected by different configurations and attachments. 


  • EPA Interim Tier 4 compliant, turbocharged, oil cooled
  • Dual element air cleaners with restriction indicator
  • High capacity engine oil cooler


  • Electronic engine monitoring system with fuel gauge, high beam indicator, turn signal indicators, high speed indicator
  • 12 Volt system with 80 amp alternator
  • Work lights, front and rear
  • Driving lights and turn signals
  • Directional lights, Fwd / Rev
  • Engine preheat
  • Back-up alarm
  • Horn


  • Hydrostatic drive with 100% inching pedal
  • 100% Locking differentials, front and rear
  • Outboard planetary drives
  • 2-Speed travel
  • Spring applied parking brake
  • Multi wet disc brake
  • Available Heavy duty construction tire assembly
  • Available Flotation tire assembly


  • Pilot controls
  • Heavy duty hydraulic quick attach coupler
  • Auxiliary lines plumbed to the end of the loader arms
  • Auxiliary hydraulic detent
  • Hydraulic system test ports
  • Hydraulic oil level sight gauge
  • Remote mounted hydraulic oil cooler


  • Z-bar loader linkage
  • Bucket float function
  • Mechanical bucket positioning
  • Hydraulic bucket quick coupler
  • Available 77" Construction combo bucket (1.05 cu yd)
  • Available Combo hitch to universal SSL adaptor
  • Available HD 48" Pallet forks and frame
  • Available Flat face hydraulic coupler kit


  • ROPS / FOPS Level 2 Cab with front and rear wipers, rear window defrost, and heater
  • 2" Retractable seat belt
  • Adjustable suspension seat with arm rest
  • Large steps and grab handles
  • Elevated operator's station
  • Multi-function joystick for machine direction (Fwd / Rev), and loader controls (Raise, Lower, Curl, Dump)
  • Air conditioner
  • Available 3" seat belt

©2017 Takeuchi Manufacturing [US], Ltd. All Rights Reserved.
Equipment depicted on this website may include optional equipment.