Takeuchi US
Home » Products » Skid Steer Loaders » TS80R2

TS80R2

The TS80R2 is a large frame skid steer with a radial lift loader that is built to perform in the most demanding applications.  It features a Deutz turbocharged engine that delivers outstanding power, torque, and reliability, and the Diesel Oxidation Catalyst (DOC) after-treatment system reduces maintenance for increased uptime.

Performance

  • Turbocharged Engine
  • EPA Final Tier 4 Engine w/ DOC Only
  • Powerful Traction Force
  • Electronic Dial Throttle

Durability

  • Radial Lift Loader Design
  • Heavy Duty Axle Pods
  • Standard Metal Face Axle Seals
  • All Welded Frame

Comfort and Convenience

  • Pilot Joystick Controls
  • Multi-Information Display
  • Lower Cabin Threshold for Entry/Egress
  • Optional Pressurized Cab

Service and Uptime

  • Swing Out Rear Door and Radiator
  • Centralized Filters
  • Automatic Fuel Bleed System
  • 2 Year, 2,000 Hour Warranty

 

Click the links below to view product specifications.

OPERATING PERFORMANCE
Loader Type Radial
Operating Weight 7,950 lbs (3,606 kg)
Tipping Load, Dirt Bucket 4,720 lbs (2,140 kg)
Rated Operating Capacity, Dirt Bucket 2,360 lbs (1,070 kg)
Bucket Breakout Force 5,845 lbs (2,651 kg)
Lift Arm Breakout Force 7,080 lbs (3,211 kg)
Traction Force 8,700 lbs (3,946 kg)
ENGINE
Make/Model Deutz / TD2.9L4, Turbocharged
Tier Rating EPA Interim Tier 4
Cylinder/Displacement 4 / 177 in³ (2.9 L)
Horsepower 74 hp (55 kW)
Rated Engine Speed 2,600 rpm
Maximum Torque 192 ft-lb (260 Nm)
Engine Lubrication 9.0 qts (8.5 L)
Cooling System 20.0 qts (19.0 L)
Fuel Tank Capacity 28.0 gal (106.0 L)
Electrical System 12 volts / 95 amps
DRIVE TRAIN
Traction Drive Type Hydrostatic
Chain Case Bow Tie Drive System
Chain Size 100 ANSI
Wheel Size 12 x 16.5
Width Over Tires 72 in (1,829 mm)
Maximum Travel Speed
     Single
     Optional Two Speed 

8.2 mph (13.1 km / hr)
11.0 mph (17.7 km / hr)
HYDRAULIC SYSTEM
Hydraulic Reservoir Capacity 10.0 gal (37.8 L)
Auxiliary Hydraulic Flow 21.5 gal/min (81.0 L / min)
Auxiliary Hydraulic Flow, High Flow Option 31.0 gal/min (117.3 Lpm)
Hydraulic System Pressure 3,335 psi (22.7 MPa)
DIMENSIONS
Maximum Lift Height to Bucket Pin 10 ft 5 in (3,175 mm)
Dump Height Fully Raised 8 ft 4 in (2,540 mm)
Dump Reach Fully Raised 2 ft 1 in (635 mm)
Maximum Bucket Rollback at Ground 30°
Maximum Dump Angle Fully Raised 34°
Transport Length 12 ft 1.5 in (3,696 mm)
Machine Length 9 ft 3.5 in (2,832 mm)
Wheel Base 4 ft 1 in (1,242 mm)
Angle of Departure 24°
Ground Clearance 10.5 in (267 mm)
Overall Width - Wide Position 6 ft 0 in (1,828 mm)
Overall Width - Wheel Reversed 5 ft 6 in (1,676 mm)
Overall Height 7 ft 0 in (2,134 mm)
FEATURES

ENGINE

  • EPA Final Tier 4 Compliant
  • Turbocharged
  • DOC Only
  • Engine Driven Fan
  • Swing Out Cooling Module
  • Dual Element Air Filter
  • Available Engine Block Heater
  • Available Rear Door Screen Guard

ELECTRICAL

  • LCD Multi-Function Machine Monitoring System 
  • 12 volt System with 95 amp Alternator
  • Work Lights: (2) Front and (2) Rear
  • Hour Meter
  • Back-up Alarm

DRIVE TRAIN AND FRAME

  • Mechanical Faced Axle Seals
  • Hydrostatic Drive System
  • 100 ANSI Chain
  • Offset Wheels are Reversible for Narrow or Wide Stance
  • Heavy Duty Tires
  • Available Flotation Tires
  • Available Foam Filled Tires
  • Available Solid Tires
  • Available Over the Tire Tracks (OTT)
  • Available Two-Speed Travel

HYDRAULIC

  • Boom Float with Detent
  • Pilot Proportional Hydraulic Controls
  • Pressure Relieving Flat Faced Coupler Body
  • Auxiliary Hydraulic Pump Flow 21.5 gal / min (81.0 L / min)
  • 14 Pin Attachment Connector
  • Available Hydraulic Quick Coupler
  • Available High Flow Auxiliary Hydraulics
  • Available Self Leveling On/Off (Up)
  • Available Ride Control Accumulator

WORKING EQUIPMENT

  • Radial Boom Design
  • Mechanical Quick Coupler
  • Available Hydraulic Quick Coupler
  • Available 67” Smooth Lip Bucket (16.2 cu ft) (Narrow Wheel Position)
  • Available 72” Smooth Lip Bucket with Bolt-on Cutting Edge (17.8 cu ft)
  • Available Bolt-on Tooth Bar
  • Available 48” Pallet Forks 

OPERATOR'S STATION

  • Tilt-up Operator Station
  • Pilot Operated Joystick Controls
  • Rear Pivoting Seat Bar with Integrated Arm Rests
  • ROPS / FOPS Structure
  • 12 volt Power Outlet
  • Available 3" Seat Belt
  • Available Deluxe Air Suspension Seat
  • Available Pressurized Cab with Swing Out Door 
  • Available Heat and Defrost
  • Available Air Conditioner, Heat, and Defrost
  • Available AM / FM / MP3 Radio with NOAA Weather Band

 

©2016 Takeuchi Manufacturing [US], Ltd. All Rights Reserved.
Equipment depicted on this website may include optional equipment.