TW95 Specs

OPERATING PERFORMANCE
Operating Weight - Cab18,188 lb (8,250 kg)
Tipping Load, Straight14,307 lb(6,490 kg)
Tipping Load, Full Turn12,652 lb(5,739 kg)
Operating Capacity, SAE J818*6,326 lb(2,870 kg)
Bucket Breakout Force15,873 lb(7,200 kg)
Lift Arm Breakout Force18,077 lb(8,200 kg)
Traction Force13,592 lb(6,165 kg)
Travel Speed - Low Range4.0 mph(6.5 km/hr)
Travel Speed - High Range12.4 mph(20.0 km/hr)
High Speed Travel24.9 mph(40.0 km/hr)
* Rate Operating Capacity (ROC) for wheel loaders is rated with a bucket
according to SAE J818 at no more than 50% of the full turn tipping load.
HYDRAULIC SYSTEM
Auxiliary Flow - Primary Circuit26.4 gpm(100.0 Lpm)
Auxiliary Flow - Optional Circuit26.0 gpm(98.0 Lpm)
Hydraulic System Pressure3,336 psi(23.0 MPa)
ENGINE
Make/ModelDeutz / TD 3.6 L4
Engine Displacement176.0 cu in(3.6 L)
Horsepower @ 2,200 rpm114.0 hp(85.0 kW)
Maximum Torque @ 1,600 rpm339.9 ft-lb(460.0 Nm)
FLUID CAPACITIES
Engine Lubrication9.5 qt(8.0 L)
Cooling System22.2 qt(21.0 L)
Fuel Tank Capacity31.7 gal(120.0 L)
Fuel Consumption (65% of Full Load)6.5 gal/hr(24.6 L/hr)
Hydraulic Reservoir Capacity28.0 gal(106.0 L)
Front Axle Lubrication7.6 qt(7.2 L)
Rear Axle Lubrication7.6 qt(7.2 L)

TW95 Dimensions

MACHINE DIMENSIONS
Max. Lift Height to Bucket Pin11 ft 10.5 in(6,187 mm)
Dump Height Fully Raised9 ft 3.3 in(2,828 mm)
Max. Reach Fully Raised2 ft 8.2 in(820 mm)
Dump Angle45°
Rollback Angle48°
Overall Length with Bucket20 ft 5.2 in(6,230 mm)
Overall Height9 ft 7.4 in(2,932 mm)
Overall Operating Height13 ft 10.0 in(4,220 mm)
Bucket Clearance Height9 ft 11.0 in(3,025 mm)
Wheel Base8 ft 2.4 in(2,500 mm)
Ground Clearance1 ft 9.2 in(540 mm)
Overall Width without Bucket7 ft 1.8 in(2,180 mm)
Outside Turning Radius15 ft 1.4 in(4,610 mm)
Inside Turning Radius7 ft 10.0 in (2,385 mm)
Recommended Bucket Width95.0 in(2,413 mm)